gabriel
/
nextcloud_ynh
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Use ynh_get_scalable_phpfpm

pull/176/head
maniack 6 years ago
parent
9659a845a6
commit
e12bd54d10
7 changed files with 500 additions and 409 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 407
      conf/php-fpm.conf
  2. 26
      config_panel.toml
  3. 230
      scripts/_common.sh
  4. 128
      scripts/_ynh_add_fpm_config
  5. 97
      scripts/config
  6. 3
      scripts/install
  7. 18
      scripts/upgrade

407
conf/php-fpm.conf
View File

@ -1,407 +0,0 @@
; Start a new pool named 'www'.
; the variable $pool can we used in any directive and will be replaced by the
; pool name ('www' here)
[__NAMETOCHANGE__]
; Per pool prefix
; It only applies on the following directives:
; - 'slowlog'
; - 'listen' (unixsocket)
; - 'chroot'
; - 'chdir'
; - 'php_values'
; - 'php_admin_values'
; When not set, the global prefix (or /usr) applies instead.
; Note: This directive can also be relative to the global prefix.
; Default Value: none
;prefix = /path/to/pools/$pool
; Unix user/group of processes
; Note: The user is mandatory. If the group is not set, the default user's group
; will be used.
user = __USER__
group = __USER__
; The address on which to accept FastCGI requests.
; Valid syntaxes are:
; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
; a specific port;
; 'port' - to listen on a TCP socket to all addresses on a
; specific port;
; '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
listen = /var/run/php5-fpm-__NAMETOCHANGE__.sock
; Set listen(2) backlog. A value of '-1' means unlimited.
; Default Value: 128 (-1 on FreeBSD and OpenBSD)
;listen.backlog = 128
; Set permissions for unix socket, if one is used. In Linux, read/write
; permissions must be set in order to allow connections from a web server. Many
; BSD-derived systems allow connections regardless of permissions.
; Default Values: user and group are set as the running user
; mode is set to 0660
listen.owner = www-data
listen.group = www-data
;listen.mode = 0660
; List of ipv4 addresses of FastCGI clients which are allowed to connect.
; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
; must be separated by a comma. If this value is left blank, connections will be
; accepted from any ip address.
; Default Value: any
;listen.allowed_clients = 127.0.0.1
; Specify the nice(2) priority to apply to the pool processes (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
; - The pool processes will inherit the master process priority
; unless it specified otherwise
; Default Value: no set
; priority = -19
; Choose how the process manager will control the number of child processes.
; Possible Values:
; static - a fixed number (pm.max_children) of child processes;
; dynamic - the number of child processes are set dynamically based on the
; following directives. With this process management, there will be
; always at least 1 children.
; pm.max_children - the maximum number of children that can
; be alive at the same time.
; pm.start_servers - the number of children created on startup.
; pm.min_spare_servers - the minimum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is less than this
; number then some children will be created.
; pm.max_spare_servers - the maximum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is greater than this
; number then some children will be killed.
; ondemand - no children are created at startup. Children will be forked when
; new requests will connect. The following parameter are used:
; pm.max_children - the maximum number of children that
; can be alive at the same time.
; pm.process_idle_timeout - The number of seconds after which
; an idle process will be killed.
; Note: This value is mandatory.
pm = dynamic
; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI. The below defaults are based on a server without much resources. Don't
; forget to tweak pm.* to fit your needs.
; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
; Note: This value is mandatory.
pm.max_children = 3
; The number of child processes created on startup.
; Note: Used only when pm is set to 'dynamic'
; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
pm.start_servers = 1
; The desired minimum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.min_spare_servers = 1
; The desired maximum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.max_spare_servers = 3
; The number of seconds after which an idle process will be killed.
; Note: Used only when pm is set to 'ondemand'
; Default Value: 10s
;pm.process_idle_timeout = 10s;
; The number of requests each child process should execute before respawning.
; This can be useful to work around memory leaks in 3rd party libraries. For
; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
; Default Value: 0
pm.max_requests = 500
; The URI to view the FPM status page. If this value is not set, no URI will be
; recognized as a status page. It shows the following informations:
; pool - the name of the pool;
; process manager - static, dynamic or ondemand;
; start time - the date and time FPM has started;
; start since - number of seconds since FPM has started;
; accepted conn - the number of request accepted by the pool;
; listen queue - the number of request in the queue of pending
; connections (see backlog in listen(2));
; max listen queue - the maximum number of requests in the queue
; of pending connections since FPM has started;
; listen queue len - the size of the socket queue of pending connections;
; idle processes - the number of idle processes;
; active processes - the number of active processes;
; total processes - the number of idle + active processes;
; max active processes - the maximum number of active processes since FPM
; has started;
; max children reached - number of times, the process limit has been reached,
; when pm tries to start more children (works only for
; pm 'dynamic' and 'ondemand');
; Value are updated in real time.
; Example output:
; pool: www
; process manager: static
; start time: 01/Jul/2011:17:53:49 +0200
; start since: 62636
; accepted conn: 190460
; listen queue: 0
; max listen queue: 1
; listen queue len: 42
; idle processes: 4
; active processes: 11
; total processes: 15
; max active processes: 12
; max children reached: 0
;
; By default the status page output is formatted as text/plain. Passing either
; 'html', 'xml' or 'json' in the query string will return the corresponding
; output syntax. Example:
; http://www.foo.bar/status
; http://www.foo.bar/status?json
; http://www.foo.bar/status?html
; http://www.foo.bar/status?xml
;
; By default the status page only outputs short status. Passing 'full' in the
; query string will also return status for each pool process.
; Example:
; http://www.foo.bar/status?full
; http://www.foo.bar/status?json&full
; http://www.foo.bar/status?html&full
; http://www.foo.bar/status?xml&full
; The Full status returns for each process:
; pid - the PID of the process;
; state - the state of the process (Idle, Running, ...);
; start time - the date and time the process has started;
; start since - the number of seconds since the process has started;
; requests - the number of requests the process has served;
; request duration - the duration in µs of the requests;
; request method - the request method (GET, POST, ...);
; request URI - the request URI with the query string;
; content length - the content length of the request (only with POST);
; user - the user (PHP_AUTH_USER) (or '-' if not set);
; script - the main script called (or '-' if not set);
; last request cpu - the %cpu the last request consumed
; it's always 0 if the process is not in Idle state
; because CPU calculation is done when the request
; processing has terminated;
; last request memory - the max amount of memory the last request consumed
; it's always 0 if the process is not in Idle state
; because memory calculation is done when the request
; processing has terminated;
; If the process is in Idle state, then informations are related to the
; last request the process has served. Otherwise informations are related to
; the current request being served.
; Example output:
; ************************
; pid: 31330
; state: Running
; start time: 01/Jul/2011:17:53:49 +0200
; start since: 63087
; requests: 12808
; request duration: 1250261
; request method: GET
; request URI: /test_mem.php?N=10000
; content length: 0
; user: -
; script: /home/fat/web/docs/php/test_mem.php
; last request cpu: 0.00
; last request memory: 0
;
; Note: There is a real-time FPM status monitoring sample web page available
; It's available in: ${prefix}/share/fpm/status.html
;
; Note: The value must start with a leading slash (/). The value can be
; anything, but it may not be a good idea to use the .php extension or it
; may conflict with a real PHP file.
; Default Value: not set
;pm.status_path = /status
; The ping URI to call the monitoring page of FPM. If this value is not set, no
; URI will be recognized as a ping page. This could be used to test from outside
; that FPM is alive and responding, or to
; - create a graph of FPM availability (rrd or such);
; - remove a server from a group if it is not responding (load balancing);
; - trigger alerts for the operating team (24/7).
; Note: The value must start with a leading slash (/). The value can be
; anything, but it may not be a good idea to use the .php extension or it
; may conflict with a real PHP file.
; Default Value: not set
;ping.path = /ping
; This directive may be used to customize the response of a ping request. The
; response is formatted as text/plain with a 200 response code.
; Default Value: pong
;ping.response = pong
; The access log file
; Default: not set
;access.log = log/$pool.access.log
; The access log format.
; The following syntax is allowed
; %%: the '%' character
; %C: %CPU used by the request
; it can accept the following format:
; - %{user}C for user CPU only
; - %{system}C for system CPU only
; - %{total}C for user + system CPU (default)
; %d: time taken to serve the request
; it can accept the following format:
; - %{seconds}d (default)
; - %{miliseconds}d
; - %{mili}d
; - %{microseconds}d
; - %{micro}d
; %e: an environment variable (same as $_ENV or $_SERVER)
; it must be associated with embraces to specify the name of the env
; variable. Some exemples:
; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
; %f: script filename
; %l: content-length of the request (for POST request only)
; %m: request method
; %M: peak of memory allocated by PHP
; it can accept the following format:
; - %{bytes}M (default)
; - %{kilobytes}M
; - %{kilo}M
; - %{megabytes}M
; - %{mega}M
; %n: pool name
; %o: ouput header
; it must be associated with embraces to specify the name of the header:
; - %{Content-Type}o
; - %{X-Powered-By}o
; - %{Transfert-Encoding}o
; - ....
; %p: PID of the child that serviced the request
; %P: PID of the parent of the child that serviced the request
; %q: the query string
; %Q: the '?' character if query string exists
; %r: the request URI (without the query string, see %q and %Q)
; %R: remote IP address
; %s: status (response code)
; %t: server time the request was received
; it can accept a strftime(3) format:
; %d/%b/%Y:%H:%M:%S %z (default)
; %T: time the log has been written (the request has finished)
; it can accept a strftime(3) format:
; %d/%b/%Y:%H:%M:%S %z (default)
; %u: remote user
;
; Default: "%R - %u %t \"%m %r\" %s"
;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
; The log file for slow requests
; Default Value: not set
; Note: slowlog is mandatory if request_slowlog_timeout is set
slowlog = /var/log/nginx/__NAMETOCHANGE__.slow.log
; The timeout for serving a single request after which a PHP backtrace will be
; dumped to the 'slowlog' file. A value of '0s' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
request_slowlog_timeout = 5s
; The timeout for serving a single request after which the worker process will
; be killed. This option should be used when the 'max_execution_time' ini option
; does not stop script execution for some reason. A value of '0' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
request_terminate_timeout = 1d
; Set open file descriptor rlimit.
; Default Value: system defined value
;rlimit_files = 1024
; Set max core size rlimit.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0
; Chroot to this directory at the start. This value must be defined as an
; absolute path. When this value is not set, chroot is not used.
; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
; of its subdirectories. If the pool prefix is not set, the global prefix
; will be used instead.
; Note: chrooting is a great security feature and should be used whenever
; possible. However, all PHP paths will be relative to the chroot
; (error_log, sessions.save_path, ...).
; Default Value: not set
;chroot =
; Chdir to this directory at the start.
; Note: relative path can be used.
; Default Value: current directory or / when chroot
chdir = __FINALPATH__
; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Note: on highloaded environement, this can cause some delay in the page
; process time (several ms).
; Default Value: no
catch_workers_output = yes
; Limits the extensions of the main script FPM will allow to parse. This can
; prevent configuration mistakes on the web server side. You should only limit
; FPM to .php extensions to prevent malicious users to use other extensions to
; exectute php code.
; Note: set an empty value to allow all extensions.
; Default Value: .php
;security.limit_extensions = .php .php3 .php4 .php5
; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
; the current environment.
; Default Value: clean env
;env[HOSTNAME] = $HOSTNAME
;env[PATH] = /usr/local/bin:/usr/bin:/bin
;env[TMP] = /tmp
;env[TMPDIR] = /tmp
;env[TEMP] = /tmp
env[PATH] = $PATH
; Additional php.ini defines, specific to this pool of workers. These settings
; overwrite the values previously defined in the php.ini. The directives are the
; same as the PHP SAPI:
; php_value/php_flag - you can set classic ini defines which can
; be overwritten from PHP call 'ini_set'.
; php_admin_value/php_admin_flag - these directives won't be overwritten by
; PHP call 'ini_set'
; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
; Defining 'extension' will load the corresponding shared extension from
; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
; overwrite previously defined php.ini values, but will append the new value
; instead.
; Note: path INI options can be relative and will be expanded with the prefix
; (pool, global or /usr)
; Default Value: nothing is defined by default except the values in php.ini and
; specified at startup with the -d argument
;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
;php_flag[display_errors] = off
;php_admin_value[error_log] = /var/log/fpm-php.www.log
;php_admin_flag[log_errors] = on
;php_admin_value[memory_limit] = 32M
; Additional php.ini defines, specific to this pool of workers.
php_value[upload_max_filesize] = 10G
php_value[post_max_size] = 10G
php_value[default_charset] = UTF-8
php_value[always_populate_raw_post_data] = -1
php_value[opcache.enable]=1
php_value[opcache.enable_cli]=1
php_value[opcache.interned_strings_buffer]=8
php_value[opcache.max_accelerated_files]=10000
php_value[opcache.memory_consumption]=128
php_value[opcache.save_comments]=1
php_value[opcache.revalidate_freq]=1

26
config_panel.toml
View File

@ -0,0 +1,26 @@
version = "0.1"
name = "Nextcloud configuration panel"
[main]
name = "Nextcloud configuration"
[main.php_fpm_config]
name = "PHP-FPM configuration"
[main.php_fpm_config.footprint]
ask = "Memory footprint of the service ?"
choices = ["low", "medium", "high", "specific"]
default = "low"
help = "low <= 20Mb per pool. medium between 20Mb and 40Mb per pool. high > 40Mb per pool.<br>Use specific to set a value with the following option."
[main.php_fpm_config.free_footprint]
ask = "Memory footprint of the service ?"
type = "number"
default = "0"
help = "Free field to specify exactly the footprint in Mb if you don't want to use one of the three previous values."
[main.php_fpm_config.usage]
ask = "Expected usage of the service ?"
choices = ["low", "medium", "high"]
default = "low"
help = "low: Personal usage, behind the sso. No RAM footprint when not used, but the impact on the processor can be high if many users are using the service.<br>medium: Low usage, few people or/and publicly accessible. Low RAM footprint, medium processor footprint when used.<br>high: High usage, frequently visited website. High RAM footprint, but lower on processor usage and quickly responding."

230
scripts/_common.sh
View File

@ -357,6 +357,8 @@ ynh_multimedia_addaccess () {
usermod -a -G multimedia $user_name
}
#=================================================
ynh_smart_mktemp () {
local min_size="${1:-300}"
# Transform the minimum size from megabytes to kilobytes
@ -382,3 +384,231 @@ ynh_smart_mktemp () {
echo "$(sudo mktemp --directory --tmpdir="$tmpdir")"
}
#=================================================
# Check the amount of available RAM
#
# usage: ynh_check_ram [--required=RAM required in Mb] [--no_swap|--only_swap] [--free_ram]
# | arg: -r, --required= - Amount of RAM required in Mb. The helper will return 0 is there's enough RAM, or 1 otherwise.
# If --required isn't set, the helper will print the amount of RAM, in Mb.
# | arg: -s, --no_swap - Ignore swap
# | arg: -o, --only_swap - Ignore real RAM, consider only swap.
# | arg: -f, --free_ram - Count only free RAM, not the total amount of RAM available.
ynh_check_ram () {
# Declare an array to define the options of this helper.
declare -Ar args_array=( [r]=required= [s]=no_swap [o]=only_swap [f]=free_ram )
local required
local no_swap
local only_swap
# Manage arguments with getopts
ynh_handle_getopts_args "$@"
required=${required:-}
no_swap=${no_swap:-0}
only_swap=${only_swap:-0}
local total_ram=$(vmstat --stats --unit M | grep "total memory" | awk '{print $1}')
local total_swap=$(vmstat --stats --unit M | grep "total swap" | awk '{print $1}')
local total_ram_swap=$(( total_ram + total_swap ))
local free_ram=$(vmstat --stats --unit M | grep "free memory" | awk '{print $1}')
local free_swap=$(vmstat --stats --unit M | grep "free swap" | awk '{print $1}')
local free_ram_swap=$(( free_ram + free_swap ))
# Use the total amount of ram
local ram=$total_ram_swap
if [ $free_ram -eq 1 ]
then
# Use the total amount of free ram
ram=$free_ram_swap
if [ $no_swap -eq 1 ]
then
# Use only the amount of free ram
ram=$free_ram
elif [ $only_swap -eq 1 ]
then
# Use only the amount of free swap
ram=$free_swap
fi
else
if [ $no_swap -eq 1 ]
then
# Use only the amount of free ram
ram=$total_ram
elif [ $only_swap -eq 1 ]
then
# Use only the amount of free swap
ram=$total_swap
fi
fi
if [ -n "$required" ]
then
# Return 1 if the amount of ram isn't enough.
if [ $ram -lt $required ]
then
return 1
else
return 0
fi
# If no RAM is required, return the amount of available ram.
else
echo $ram
fi
}
#=================================================
# Define the values to configure php-fpm
#
# usage: ynh_get_scalable_phpfpm --usage=usage --footprint=footprint [--print]
# | arg: -f, --footprint - Memory footprint of the service (low/medium/high).
# low - Less than 20Mb of ram by pool.
# medium - Between 20Mb and 40Mb of ram by pool.
# high - More than 40Mb of ram by pool.
# Or specify exactly the footprint, the load of the service as Mb by pool instead of having a standard value.
# To have this value, use the following command and stress the service.
# watch -n0.5 ps -o user,cmd,%cpu,rss -u APP
#
# | arg: -u, --usage - Expected usage of the service (low/medium/high).
# low - Personal usage, behind the sso.
# medium - Low usage, few people or/and publicly accessible.
# high - High usage, frequently visited website.
#
# | arg: -p, --print - Print the result
#
#
#
# The footprint of the service will be used to defined the maximum footprint we can allow, which is half the maximum RAM.
# So it will be used to defined 'pm.max_children'
# A lower value for the footprint will allow more children for 'pm.max_children'. And so for
# 'pm.start_servers', 'pm.min_spare_servers' and 'pm.max_spare_servers' which are defined from the
# value of 'pm.max_children'
# NOTE: 'pm.max_children' can't exceed 4 times the number of processor's cores.
#
# The usage value will defined the way php will handle the children for the pool.
# A value set as 'low' will set the process manager to 'ondemand'. Children will start only if the
# service is used, otherwise no child will stay alive. This config gives the lower footprint when the
# service is idle. But will use more proc since it has to start a child as soon it's used.
# Set as 'medium', the process manager will be at dynamic. If the service is idle, a number of children
# equal to pm.min_spare_servers will stay alive. So the service can be quick to answer to any request.
# The number of children can grow if needed. The footprint can stay low if the service is idle, but
# not null. The impact on the proc is a little bit less than 'ondemand' as there's always a few
# children already available.
# Set as 'high', the process manager will be set at 'static'. There will be always as many children as
# 'pm.max_children', the footprint is important (but will be set as maximum a quarter of the maximum
# RAM) but the impact on the proc is lower. The service will be quick to answer as there's always many
# children ready to answer.
ynh_get_scalable_phpfpm () {
local legacy_args=ufp
# Declare an array to define the options of this helper.
declare -Ar args_array=( [u]=usage= [f]=footprint= [p]=print )
local usage
local footprint
local print
# Manage arguments with getopts
ynh_handle_getopts_args "$@"
# Set all characters as lowercase
footprint=${footprint,,}
usage=${usage,,}
print=${print:-0}
if [ "$footprint" = "low" ]
then
footprint=20
elif [ "$footprint" = "medium" ]
then
footprint=35
elif [ "$footprint" = "high" ]
then
footprint=50
fi
# Define the way the process manager handle child processes.
if [ "$usage" = "low" ]
then
php_pm=ondemand
elif [ "$usage" = "medium" ]
then
php_pm=dynamic
elif [ "$usage" = "high" ]
then
php_pm=static
else
ynh_die --message="Does not recognize '$usage' as an usage value."
fi
# Get the total of RAM available, except swap.
local max_ram=$(ynh_check_ram --no_swap)
less0() {
# Do not allow value below 1
if [ $1 -le 0 ]
then
echo 1
else
echo $1
fi
}
# Define pm.max_children
# The value of pm.max_children is the total amount of ram divide by 2 and divide again by the footprint of a pool for this app.
# So if php-fpm start the maximum of children, it won't exceed half of the ram.
php_max_children=$(( $max_ram / 2 / $footprint ))
# If process manager is set as static, use half less children.
# Used as static, there's always as many children as the value of pm.max_children
if [ "$php_pm" = "static" ]
then
php_max_children=$(( $php_max_children / 2 ))
fi
php_max_children=$(less0 $php_max_children)
# To not overload the proc, limit the number of children to 4 times the number of cores.
local core_number=$(nproc)
local max_proc=$(( $core_number * 4 ))
if [ $php_max_children -gt $max_proc ]
then
php_max_children=$max_proc
fi
if [ "$php_pm" = "dynamic" ]
then
# Define pm.start_servers, pm.min_spare_servers and pm.max_spare_servers for a dynamic process manager
php_min_spare_servers=$(( $php_max_children / 8 ))
php_min_spare_servers=$(less0 $php_min_spare_servers)
php_max_spare_servers=$(( $php_max_children / 2 ))
php_max_spare_servers=$(less0 $php_max_spare_servers)
php_start_servers=$(( $php_min_spare_servers + ( $php_max_spare_servers - $php_min_spare_servers ) /2 ))
php_start_servers=$(less0 $php_start_servers)
else
php_min_spare_servers=0
php_max_spare_servers=0
php_start_servers=0
fi
if [ $print -eq 1 ]
then
ynh_debug --message="Footprint=${footprint}Mb by pool."
ynh_debug --message="Process manager=$php_pm"
ynh_debug --message="Max RAM=${max_ram}Mb"
if [ "$php_pm" != "static" ]; then
ynh_debug --message="\nMax estimated footprint=$(( $php_max_children * $footprint ))"
ynh_debug --message="Min estimated footprint=$(( $php_min_spare_servers * $footprint ))"
fi
if [ "$php_pm" = "dynamic" ]; then
ynh_debug --message="Estimated average footprint=$(( $php_max_spare_servers * $footprint ))"
elif [ "$php_pm" = "static" ]; then
ynh_debug --message="Estimated footprint=$(( $php_max_children * $footprint ))"
fi
ynh_debug --message="\nRaw php-fpm values:"
ynh_debug --message="pm.max_children = $php_max_children"
if [ "$php_pm" = "dynamic" ]; then
ynh_debug --message="pm.start_servers = $php_start_servers"
ynh_debug --message="pm.min_spare_servers = $php_min_spare_servers"
ynh_debug --message="pm.max_spare_servers = $php_max_spare_servers"
fi
fi
}

128
scripts/_ynh_add_fpm_config
View File

@ -0,0 +1,128 @@
#!/bin/bash
# Create a dedicated php-fpm config
#
# usage 1: ynh_add_fpm_config [--phpversion=7.X] [--use_template]
# | arg: -v, --phpversion - Version of php to use.
# | arg: -t, --use_template - Use this helper in template mode.
#
# -----------------------------------------------------------------------------
#
# usage 2: ynh_add_fpm_config [--phpversion=7.X] --usage=usage --footprint=footprint
# | arg: -v, --phpversion - Version of php to use.#
# | arg: -f, --footprint - Memory footprint of the service (low/medium/high).
# low - Less than 20Mb of ram by pool.
# medium - Between 20Mb and 40Mb of ram by pool.
# high - More than 40Mb of ram by pool.
# Or specify exactly the footprint, the load of the service as Mb by pool instead of having a standard value.
# To have this value, use the following command and stress the service.
# watch -n0.5 ps -o user,cmd,%cpu,rss -u APP
#
# | arg: -u, --usage - Expected usage of the service (low/medium/high).
# low - Personal usage, behind the sso.
# medium - Low usage, few people or/and publicly accessible.
# high - High usage, frequently visited website.
#
# Requires YunoHost version 2.7.2 or higher.
ynh_add_fpm_config () {
# Declare an array to define the options of this helper.
local legacy_args=vtuf
declare -Ar args_array=( [v]=phpversion= [t]=use_template [u]=usage= [f]=footprint= )
local phpversion
local use_template
local usage
local footprint
# Manage arguments with getopts
ynh_handle_getopts_args "$@"
# The default behaviour is to use the template.
use_template="${use_template:-1}"
usage="${usage:-}"
footprint="${footprint:-}"
if [ -n "$usage" ] || [ -n "$footprint" ]; then
use_template=0
fi
# Configure PHP-FPM 7.0 by default
phpversion="${phpversion:-7.0}"
local fpm_config_dir="/etc/php/$phpversion/fpm"
local fpm_service="php${phpversion}-fpm"
# Configure PHP-FPM 5 on Debian Jessie
if [ "$(ynh_get_debian_release)" == "jessie" ]; then
fpm_config_dir="/etc/php5/fpm"
fpm_service="php5-fpm"
fi
ynh_app_setting_set --app=$app --key=fpm_config_dir --value="$fpm_config_dir"
ynh_app_setting_set --app=$app --key=fpm_service --value="$fpm_service"
finalphpconf="$fpm_config_dir/pool.d/$app.conf"
ynh_backup_if_checksum_is_different --file="$finalphpconf"
if [ $use_template -eq 1 ]
then
# Usage 1, use the template in ../conf/php-fpm.conf
sudo cp ../conf/php-fpm.conf "$finalphpconf"
ynh_replace_string --match_string="__NAMETOCHANGE__" --replace_string="$app" --target_file="$finalphpconf"
ynh_replace_string --match_string="__FINALPATH__" --replace_string="$final_path" --target_file="$finalphpconf"
ynh_replace_string --match_string="__USER__" --replace_string="$app" --target_file="$finalphpconf"
ynh_replace_string --match_string="__PHPVERSION__" --replace_string="$phpversion" --target_file="$finalphpconf"
else
# Usage 2, generate a php-fpm config file with ynh_get_scalable_phpfpm
ynh_get_scalable_phpfpm --usage=$usage --footprint=$footprint
# Copy the default file
sudo cp "$fpm_config_dir/pool.d/www.conf" "$finalphpconf"
# Replace standard variables into the default file
ynh_replace_string --match_string="^\[www\]" --replace_string="[$app]" --target_file="$finalphpconf"
ynh_replace_string --match_string=".*listen = .*" --replace_string="listen = /var/run/php/php7.0-fpm-$app.sock" --target_file="$finalphpconf"
ynh_replace_string --match_string="^user = .*" --replace_string="user = $app" --target_file="$finalphpconf"
ynh_replace_string --match_string="^group = .*" --replace_string="group = $app" --target_file="$finalphpconf"
ynh_replace_string --match_string=".*chdir = .*" --replace_string="chdir = $final_path" --target_file="$finalphpconf"
# Configure fpm children
ynh_replace_string --match_string=".*pm = .*" --replace_string="pm = $php_pm" --target_file="$finalphpconf"
ynh_replace_string --match_string=".*pm.max_children = .*" --replace_string="pm.max_children = $php_max_children" --target_file="$finalphpconf"
ynh_replace_string --match_string=".*pm.max_requests = .*" --replace_string="pm.max_requests = 500" --target_file="$finalphpconf"
ynh_replace_string --match_string=".*request_terminate_timeout = .*" --replace_string="request_terminate_timeout = 1d" --target_file="$finalphpconf"
if [ "$php_pm" = "dynamic" ]
then
ynh_replace_string --match_string=".*pm.start_servers = .*" --replace_string="pm.start_servers = $php_start_servers" --target_file="$finalphpconf"
ynh_replace_string --match_string=".*pm.min_spare_servers = .*" --replace_string="pm.min_spare_servers = $php_min_spare_servers" --target_file="$finalphpconf"
ynh_replace_string --match_string=".*pm.max_spare_servers = .*" --replace_string="pm.max_spare_servers = $php_max_spare_servers" --target_file="$finalphpconf"
elif [ "$php_pm" = "ondemand" ]
then
ynh_replace_string --match_string=".*pm.process_idle_timeout = .*" --replace_string="pm.process_idle_timeout = 10s" --target_file="$finalphpconf"
fi
# Comment unused parameters
if [ "$php_pm" != "dynamic" ]
then
ynh_replace_string --match_string=".*\(pm.start_servers = .*\)" --replace_string=";\1" --target_file="$finalphpconf"
ynh_replace_string --match_string=".*\(pm.min_spare_servers = .*\)" --replace_string=";\1" --target_file="$finalphpconf"
ynh_replace_string --match_string=".*\(pm.max_spare_servers = .*\)" --replace_string=";\1" --target_file="$finalphpconf"
fi
if [ "$php_pm" != "ondemand" ]
then
ynh_replace_string --match_string=".*\(pm.process_idle_timeout = .*\)" --replace_string=";\1" --target_file="$finalphpconf"
fi
# Concatene the extra config.
if [ -e ../conf/extra_php-fpm.conf ]; then
cat ../conf/extra_php-fpm.conf >> "$finalphpconf"
fi
fi
sudo chown root: "$finalphpconf"
ynh_store_file_checksum --file="$finalphpconf"
if [ -e "../conf/php-fpm.ini" ]
then
echo "Packagers ! Please do not use a separate php ini file, merge your directives in the pool file instead." >&2
finalphpini="$fpm_config_dir/conf.d/20-$app.ini"
ynh_backup_if_checksum_is_different "$finalphpini"
sudo cp ../conf/php-fpm.ini "$finalphpini"
sudo chown root: "$finalphpini"
ynh_store_file_checksum "$finalphpini"
fi
ynh_systemd_action --service_name=$fpm_service --action=reload
}

97
scripts/config
View File

@ -0,0 +1,97 @@
#!/bin/bash
#=================================================
# GENERIC STARTING
#=================================================
# IMPORT GENERIC HELPERS
#=================================================
source _common.sh
source /usr/share/yunohost/helpers
source _ynh_add_fpm_config
#=================================================
# RETRIEVE ARGUMENTS
#=================================================
app=${YNH_APP_INSTANCE_NAME:-$YNH_APP_ID}
#=================================================
# LOAD VALUES
#=================================================
# Load the real value from the app config or elsewhere.
# Then get the value from the form.
# If the form has a value for a variable, take the value from the form,
# Otherwise, keep the value from the app config.
# Footprint for php-fpm
old_fpm_footprint="$(ynh_app_setting_get --app=$app --key=fpm_footprint)"
fpm_footprint="${YNH_CONFIG_MAIN_PHP_FPM_CONFIG_FOOTPRINT:-$old_fpm_footprint}"
# Free footprint value for php-fpm
# Check if fpm_footprint is an integer
if [ "$fpm_footprint" -eq "$fpm_footprint" ] 2> /dev/null
then
# If fpm_footprint is an integer, that's a numeric value for the footprint
old_free_footprint=$fpm_footprint
fpm_footprint=specific
else
old_free_footprint=0
fi
free_footprint="${YNH_CONFIG_MAIN_PHP_FPM_CONFIG_FREE_FOOTPRINT:-$old_free_footprint}"
# Usage for php-fpm
old_fpm_usage="$(ynh_app_setting_get --app=$app --key=fpm_usage)"
fpm_usage="${YNH_CONFIG_MAIN_PHP_FPM_CONFIG_USAGE:-$old_fpm_usage}"
#=================================================
# SHOW_CONFIG FUNCTION FOR 'SHOW' COMMAND
#=================================================
show_config() {
# here you are supposed to read some config file/database/other then print the values
# ynh_return "YNH_CONFIG_${PANEL_ID}_${SECTION_ID}_${OPTION_ID}=value"
ynh_return "YNH_CONFIG_MAIN_PHP_FPM_CONFIG_FOOTPRINT=$fpm_footprint"
ynh_return "YNH_CONFIG_MAIN_PHP_FPM_CONFIG_FREE_FOOTPRINT=$free_footprint"
ynh_return "YNH_CONFIG_MAIN_PHP_FPM_CONFIG_USAGE=$fpm_usage"
}
#=================================================
# MODIFY THE CONFIGURATION
#=================================================
apply_config() {
#=================================================
# RECONFIGURE PHP-FPM
#=================================================
if [ "$fpm_usage" != "$old_fpm_usage" ] || [ "$fpm_footprint" != "$old_fpm_footprint" ] || [ "$free_footprint" != "$old_free_footprint" ]
then
# If fpm_footprint is set to 'specific', use $free_footprint value.
if [ "$fpm_footprint" = "specific" ]
then
fpm_footprint=$free_footprint
fi
if [ "$fpm_footprint" != "0" ]
then
ynh_add_fpm_config --usage=$fpm_usage --footprint=$fpm_footprint
else
ynh_print_err --message="When selecting 'specific', you have to set a footprint value into the field below."
fi
fi
}
#=================================================
# GENERIC FINALIZATION
#=================================================
# SELECT THE ACTION FOLLOWING THE GIVEN ARGUMENT
#=================================================
case $1 in
show) show_config;;
apply) apply_config;;
esac

3
scripts/install
View File

@ -8,6 +8,7 @@
source _common.sh
source /usr/share/yunohost/helpers
source _ynh_add_fpm_config
#=================================================
# MANAGE SCRIPT FAILURE
@ -114,7 +115,7 @@ ynh_system_user_create $app
#=================================================
# Create a dedicated php-fpm config
ynh_add_fpm_config
ynh_add_fpm_config --usage=medium --footprint=high
#=================================================
# SPECIFIC SETUP

18
scripts/upgrade
View File

@ -8,6 +8,7 @@
source _common.sh
source /usr/share/yunohost/helpers
source _ynh_add_fpm_config
#=================================================
# LOAD SETTINGS
@ -22,6 +23,9 @@ final_path=$(ynh_app_setting_get $app final_path)
db_name=$(ynh_app_setting_get $app db_name)
user_home=$(ynh_app_setting_get $app user_home)
fpm_footprint=$(ynh_app_setting_get --app=$app --key=fpm_footprint)
fpm_usage=$(ynh_app_setting_get --app=$app --key=fpm_usage)
#=================================================
# ENSURE DOWNWARD COMPATIBILITY
#=================================================
@ -38,6 +42,18 @@ if [ -z $final_path ]; then
ynh_app_setting_set $app final_path $final_path
fi
# If fpm_footprint doesn't exist, create it
if [ -z "$fpm_footprint" ]; then
fpm_footprint=high
ynh_app_setting_set --app=$app --key=fpm_footprint --value=$fpm_footprint
fi
# If fpm_usage doesn't exist, create it
if [ -z "$fpm_usage" ]; then
fpm_usage=medium
ynh_app_setting_set --app=$app --key=fpm_usage --value=$fpm_usage
fi
#=================================================
# BACKUP BEFORE UPGRADE THEN ACTIVE TRAP
#=================================================
@ -135,7 +151,7 @@ ynh_system_user_create $app
#=================================================
# Create a dedicated php-fpm config
ynh_add_fpm_config
ynh_add_fpm_config --usage=$fpm_usage --footprint=$fpm_footprint
#=================================================
# UPGRADE DEPENDENCIES

Write Preview
Loading…
Cancel
Save